Cool Automation 6000L Uživatelský manuál stáhnout pdf (Strana 12)

12 | Keysight | InniiVision 6000L Series Low-Prole Oscilloscopes - Data Sheet

Performance characteristics (continued)

General characteristics (continued)

Trigger out

When Triggers is selected 0 to 5 V into high impedance

(delay ~17 ns) 0 to 2.5 V into 50 Ω

When Source Frequency or 0 to 580 mV into high impedance

Source Frequency/8 is selected 0 to 290 mV into 50 Ω

Max frequency output 350 MHz (in source frequency mode when terminated in 50 Ω)

125 MHz (in source frequency/8 mode when terminated in 50 Ω)

10 MHz ref in/out TTL out, 180 mV to 1 V amplitude within 0 to 2 V offset

Power requirements

Line voltage range 100-240 V, 50/60 Hz auto ranging

Line frequency 50/60 Hz

Power usage 80 W max

Environmental characteristics

Ambient temperature Operating -10 °C to +50 °C; non-operating -40 °C to +70 °C

Humidity Operating 95% RH at 40 °C for 24 hours; Non-operating 90% RH at 65 °C for 24 hours

Altitude Operating to 4,570 m (15,000 ft); non-operating to 15,244 m (50,000 ft)

Vibration Keysight class GP and MIL-PRF-28800F; Class 3 random

Shock Keysight class GP and MIL-PRF-28800F; (operating 30 g, 1/2 sine, 11-ms duration, 3 shocks/

axis

along major axis. Total of 18 shocks)

Pollution degree Normally only dry non-conductive pollution occurs.

Occasionally a temporary conductivity caused by condensation must be expected.

Indoor use This instrument is rated for indoor use only

Other

Installation categories CAT I

EMC IEC 61326-1:1997, EN 61326-1:1997

Safety IEC 61010-1:2001, EN 61010-1:2001

Canada: CSA-C22.2 No. 1010.1:1992

UL 61010-1:2003

Supplementary information The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC

and the EMC Directive 89/336/EEC, and carries the CE-marking accordingly.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

Žádné komentáře

Cool Automation 6000L Uživatelský manuál Strana 12